Instructions

VHS Tape
Installation Guide

Full video

Here

Step 1

Remove existing chain protection device to ensure a good installation.

VHS is compatible with RideWrap™ protection kits and Lotus Pro™ paint protection film.

Step 2

Clean with a solvent and allow to dry.

Step 3

Test the length of VHS, and trim to size if required.

Step 4

Peel backing tape, and apply even firm pressure while wrapping the VHS to your bike.

Step 5

Leave the part to set for 24hrs before riding.

Step 6

Offcuts can be great for use in other small areas.

Installation Instructions

  1. Remove your existing chainstay protection
    VHS is compatible with RideWrap™ protection kits and Lotus Pro™ paint protection film.
  2. Clean thoroughly
    Give the chainstay a proper clean to remove any grime or residue. Finish with some isopropyl alcohol to get things squeaky clean. Avoid household cleaners—many contain silicone, which can prevent the tape from sticking properly.
  3. Test and trim
     Test-fit the length of the VHS tape. Trim to size if needed.
  4. Apply the tape
     Peel off the backing and apply the tape to your chainstay using even, firm pressure.
  5. Let it set
     Allow the adhesive to set for 24 hours before riding.
  6. Use your offcuts
     Offcuts are perfect for protecting other small, high-wear areas.

Important Notes
Follow the instructions carefully. Returns or refunds will not be issued for improper installation or damage whilst riding—only for manufacturing defects.